Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.6.1. Removal
6.2.6.2. Installation
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








6-2-6-2-ustanovka.html

6.2.6.2. Installation

Establish a new axis of the hinge, having combined openings in a fork of the amplifier of brakes and a pedal of a brake.

Fig. 6.20. Check of installation of an axis of the hinge


Make sure that the axis of the hinge concerns a fork of the amplifier of brakes completely (fig. 6.20).
Check a brake pedal.
At completely released brake pedal, insert the new switch of signals of braking into an opening on a brake pedal.

Fig. 6.21. Turning of the switch of signals of braking on 45 °


Fix the switch of signals of braking, having turned it counterclockwise on 45 ° (fig. 6.21).

NOTE
Adjustment of a gap of a bolt of the limiter and limiter of a pedal after the switch of signals of braking is reliably blocked, is not required.

"previous page
6.2.6.1. Removal
following page"
6.2.7. Removal and installation of the main brake cylinder