Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.14.1. Removal
6.2.14.2. Installation
6.2.15. Check of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 










d925ae9b

6-2-14-2-ustanovka.html

6.2.14.2. Installation

Remove a rust and dirt from a contact surface of a brake disk and a nave of a wheel.
Combine the tags made before removal and establish a brake disk on a wheel nave.
Establish a brake shoe (outer side) on a support.
Clear an open part of the piston.

Fig. 6.54. Installation of the piston of the brake cylinder


Slowly rotating the piston clockwise with use of special adaptation drown it completely inside (fig. 6.54).

Fig. 6.55. Scheme of installation of a spring of a brake shoe


Combine a spring of a brake shoe (inside) with a piston groove, and insert it in the direction of an arrow (fig. 6.55).
Establish a brake shoe (inside) in a support.
Install other components as it should be, the return to removal.
After installation several times press a pedal of a brake and check the following:
– piston stroke of the lever of the parking brake;
– prikhvatyvany brakes.

"previous page
6.2.14.1. Removal
following page"
6.2.15. Check of the parking brake system