Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.14.1. Removal
6.2.14.2. Installation
6.2.15. Check of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 










d925ae9b

6-2-14-1-snyatie.html

6.2.14.1. Removal

Remove a cable of the parking brake system.
Disconnect the brake highway.
Remove a brake shoe (outer side) from a support.

Fig. 6.52. Removal of a brake shoe


Pull a block of a brake disk (inside) in the direction of an arrow to take out it from a support, as shown in the figure 6.52.

Fig. 6.53. Drawing tags on a nave of a wheel and a brake disk


Apply an adjusting tag on a nave of a wheel and a brake disk (fig. 6.53).
Remove a brake disk.

"previous page
6.2.14. Removal and installation of the back disk brake mechanism
following page"
6.2.14.2. Installation