Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Check and adjustment of a pedal of coupling
3.1.2.1. Adjustment of height of provision of a pedal
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling
3.1.2.3. Verification of the provision of switching off of coupling
3.1.2.4. Removal and installation of a pedal of coupling
3.1.2.5. Removal and installation of tubes of a hydraulic actuator of coupling
3.1.2.6. Removal and installation of the main cylinder of the drive of switching off of coupling
3.1.2.7. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 










d925ae9b

3-1-2-2-proverka-i-regulirovka-svobodnogo-khoda-pedali-scepleniya.html

3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling

Fig. 3.4. Scheme of adjustment of a free wheeling of a pedal


Press a coupling pedal before emergence of resistance. If necessary adjust a free wheeling of a pedal of coupling. For this purpose weaken a lock-nut "With" and rotate a rod of "D" before installation of the required free wheeling of a pedal of coupling. After adjustment tighten a lock-nut (fig. 3.4).
Free wheeling of a pedal: 1–3 mm.
Free wheeling of a rod: 0,1–0,5 mm.

"previous page
3.1.2.1. Adjustment of height of provision of a pedal
following page"
3.1.2.3. Verification of the provision of switching off of coupling