Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Check and adjustment of a pedal of coupling
3.1.2.1. Adjustment of height of provision of a pedal
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling
3.1.2.3. Verification of the provision of switching off of coupling
3.1.2.4. Removal and installation of a pedal of coupling
3.1.2.5. Removal and installation of tubes of a hydraulic actuator of coupling
3.1.2.6. Removal and installation of the main cylinder of the drive of switching off of coupling
3.1.2.7. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








3-1-2-1-regulirovka-vysoty-polozheniya-pedali.html

3.1.2.1. Adjustment of height of provision of a pedal

Fig. 3.3. Scheme of adjustment of height of provision of a pedal


Measure distance from an overlay of a pedal to a floor covering. If necessary adjust height of provision of a pedal of coupling. For this purpose weaken a lock-nut And yes rotate an adjusting bolt In before installation of the required height of provision of a pedal of coupling. After adjustment tighten a lock-nut (fig. 3.3).
Height of provision of a pedal: 210–216 mm.

"previous page
3.1.2. Check and adjustment of a pedal of coupling
following page"
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling




d925ae9b