Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Check and adjustment of a pedal of coupling
3.1.2.1. Adjustment of height of provision of a pedal
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling
3.1.2.3. Verification of the provision of switching off of coupling
3.1.2.4. Removal and installation of a pedal of coupling
3.1.2.5. Removal and installation of tubes of a hydraulic actuator of coupling
3.1.2.6. Removal and installation of the main cylinder of the drive of switching off of coupling
3.1.2.7. Removal, check and installation of coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








d925ae9b

3-1-2-3-proverka-polozheniya-vyklyucheniya-scepleniya.html

3.1.2.3. Verification of the provision of switching off of coupling

Extend the lever of the parking brake so that wheels were blocked.
Start the engine and let's it work on the idling mode.
At not pressed coupling pedal slowly include transfer of a backing.
Fix the gear shifting lever in situation when gear wheels enter gearing.
Slowly press a coupling pedal.
Stop a coupling pedal when noise of gear wheels (the provision of switching off of coupling) stops.
Measure distance And (distance from the provision of switching off of coupling to the provision of completely pressed pedal) and the coupling pedal course.

Fig. 3.5. Scheme of verification of the provision of switching off of coupling


Make sure that distance And yes the course of a pedal of coupling meet the established standards (fig. 3.5).
Distance "And": 20 mm.
Pedal course: 140 mm.

"previous page
3.1.2.2. Check and adjustment of a free wheeling of a pedal of coupling
following page"
3.1.2.4. Removal and installation of a pedal of coupling