Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. General information
8.2. Hinged components of a body
8.3. Body glazing
8.4. Seats
8.5. Conditioner and heater
8.5.1. Coolant
8.5.2. Air filter
8.5.3. Block of the air conditioning system
8.5.4. Evaporator
8.5.5. Broad valve
8.5.6. Condenser
8.5.7. Check of a radiator of a heater
8.5.8. Removal and installation of a back air duct
8.5.9. Removal and installation of the compressor of the air conditioning system
8.5.10. Dismantling and assembly of the obgonny coupling
8.5.11. Adjustment of the obgonny coupling
8.5.12. Check of the obgonny coupling
8.5.13. Removal and installation of the condenser
8.5.14. Check of the condenser
8.5.15. Removal and installation of lines of coolant (LF)
8.6. Tables
 










d925ae9b

8-5-6-kondensator.html

8.5.6. Condenser

The condenser with additional cooling is used. It is the multiline condenser which is equipped with an element of additional cooling and is combined with a receiver/moisture separator.

Fig. 8.66. Condenser: 1 – condenser; 2 – cooling element; 3 – element of additional cooling; 4 – receiver/moisture separator


The condenser with additional cooling divides gas and liquid phases of the coolant which is originally cooled in the condenser in a receiver/moisture separator where coolant comes back to an element of additional cooling again and is again cooled for acceleration of liquefaction and improvement of the cooling ability.


"previous page
8.5.5. Broad valve
following page"
8.5.7. Check of a radiator of a heater