Removal. Mazda 3 (since 2003 release)
Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.7.1. Removal
6.2.7.2. Installation
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








6-2-7-1-snyatie.html

6.2.7.1. Removal

ATTENTION
Do not allow hit of brake fluid on the painted surfaces. At hit of brake fluid on the painted surface wash away it immediately.

Merge brake fluid.
Disconnect the socket of the sensor of level of brake fluid.
Disconnect brake магастраль, disconnect brake tubes from the main brake cylinder.

Fig. 6.23. A hose detachment from a tank with brake fluid


Disconnect a hose from a tank with brake fluid, pressing in the point designated in the drawing by an arrow (fig. 6.23).
Turn off two nuts of fastening, remove the union, the main brake cylinder and laying.

"previous page
6.2.7. Removal and installation of the main brake cylinder
following page"
6.2.7.2. Installation




d925ae9b