Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.5.1. Check of a pedal of a brake
6.2.5.1.1. Check of height of provision of a pedal of a brake
6.2.5.1.2. Adjustment of height of provision of a pedal of a brake
6.2.5.1.3. Check of a gap of a pedal of a brake
6.2.5.1.4. Adjustment of a gap of a pedal of a brake
6.2.5.1.5. Check of a gap pedal floor
6.2.5.1.6. Check of the switch of signals of braking
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








d925ae9b




6-2-5-1-6-proverka-vyklyuchatelya-signalov-tormozheniya.html

6.2.5.1.6. Check of the switch of signals of braking

Disconnect a negative wire of the rechargeable battery.
Disconnect a plait of the socket of the switch of signals of braking.

Fig. 6.18. Scheme of check of the switch of signals of braking


Check existence of an electric chain between conclusions of the socket of the switch of signals of braking (fig. 6.18).
If it not so, replace the switch of signals of braking.

"previous page
6.2.5.1.5. Check of a gap pedal floor
following page"
6.2.6. Removal and installation of a pedal of a brake