Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. Brake system
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from the brake system
6.2.4. Check of the backpressure valve of a vacuum hose (amplifier of brakes)
6.2.5. Removal and installation of a vacuum hose (amplifier of brakes)
6.2.6. Removal and installation of a pedal of a brake
6.2.7. Removal and installation of the main brake cylinder
6.2.8. Check of the sensor of level of liquid
6.2.9. Removal and installation of the vacuum amplifier of brakes
6.2.10. Check of the vacuum amplifier of brakes
6.2.11. Dismantling and assembly of the main cylinder
6.2.12. Removal and installation of a forward brake disk
6.2.13. Replacement of front brake shoes
6.2.14. Removal and installation of the back disk brake mechanism
6.2.15. Check of the parking brake system
6.2.15.1. Adjustment of the parking brake system
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS
6.2.17. Removal and installation of the hydraulic block of anti-blocking system of brakes
6.3. Tables
7. Onboard electric equipment
8. Body
 








d925ae9b

6-2-15-1-regulirovka-stoyanochnojj-tormoznojj-sistemy.html

6.2.15.1. Adjustment of the parking brake system

Start the engine and press several times a brake pedal.
Stop the engine.
Remove an ashtray behind the central console.

Fig. 6.57. Adjusting nut of the parking brake system


Turn an adjusting nut, as shown in the figure 6.57.
After adjustment make the following:
– turn the ignition key in position of ON, extend the lever of the parking brake on one click and be convinced that the lamp of the alarm system of the parking brake system lights up;
– be convinced that back brake mechanisms do not block a wheel.

"previous page
6.2.15. Check of the parking brake system
following page"
6.2.16. Removal, check and installation of the back sensor of speed of a wheel of ABS