Dismantling of an epiploon of an internal guide. Mazda 3 (since 2003 release)
Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.2. General checks
5.3. Working operations with the steering mechanism
5.3.1. Precautionary measures during the work with system of passive safety (SRS)
5.3.2. Removal, check and installation of a steering wheel and steering column
5.3.3. Dismantling of the steering mechanism and steering drafts
5.3.3.1. Dismantling of steering draft
5.3.3.2. Dismantling of a shaft of a gear wheel and case
5.3.3.3. Dismantling of the top bearing and epiploon
5.3.3.4. Dismantling of an epiploon of an internal guide
5.3.4. Check of the steering mechanism and steering drafts
5.3.5. Removal and installation of the pump of the hydraulic booster
5.4. Tables
6. Brake system
7. Onboard electric equipment
8. Body
 








5-3-3-4-razborka-salnika-vnutrennejj-napravlyayushhejj.html

5.3.3.4. Dismantling of an epiploon of an internal guide

Install special devices from the valve.
Install special adaptation on the gear wheel case.

Fig. 5.25. Vypressovka of an epiploon and internal guide


Vypressuyte epiploon and internal guide (fig. 5.25).

Fig. 5.26. Vypressovka of a rubber support from the case of the steering mechanism


Vypressuyte a rubber support from the case of the steering mechanism, using special devices and a press (fig. 5.26).

"previous page
5.3.3.3. Dismantling of the top bearing and epiploon
following page"
5.3.4. Check of the steering mechanism and steering drafts




d925ae9b