Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.2. General checks
5.3. Working operations with the steering mechanism
5.3.1. Precautionary measures during the work with system of passive safety (SRS)
5.3.2. Removal, check and installation of a steering wheel and steering column
5.3.3. Dismantling of the steering mechanism and steering drafts
5.3.3.1. Dismantling of steering draft
5.3.3.2. Dismantling of a shaft of a gear wheel and case
5.3.3.3. Dismantling of the top bearing and epiploon
5.3.3.4. Dismantling of an epiploon of an internal guide
5.3.4. Check of the steering mechanism and steering drafts
5.3.5. Removal and installation of the pump of the hydraulic booster
5.4. Tables
6. Brake system
7. Onboard electric equipment
8. Body
 










d925ae9b

5-3-3-1-razborka-rulevojj-tyagi.html

5.3.3.1. Dismantling of steering draft

Fig. 5.16. Components of the steering mechanism and steering drafts: 1 – hydraulic system pipeline; 2 – tip of steering draft; 3 – lock-nut; 4 – collar of a protective cover; 5 – tape collar of a protective cover; 6 – protective cover; 7 – steering draft; 8 – washer; 9 – lock-nut (adjusting cover); 10 – adjusting cover; 11 – lath emphasis spring; 12 – lath emphasis; 13 – bolt; 14 – shaft of a gear wheel and case; 15 – gear wheel shaft; 16 – sealing ring; 17 – lock ring; 18 – the operating valve; 19 – ring sealant; 20 – gear wheel shaft; 21 – valve case; 22 – top bearing; 23 – epiploon; 24 – return pipeline; 25 – valve case; 26 – holder; 27 – sealing ring; 28 – U-shaped laying; 29 – basic ring; 30 – steering rack; 31 – ring sealant; 32 – sealing ring; 33 – epiploon; 34 – internal guide; 35 – case of the steering mechanism; 36 – rubber support


Remove details in the order specified in the figure 5.16.
Unclench a washer.

Fig. 5.17. Removal of steering draft


Remove steering draft (fig. 5.17).

Fig. 5.18. Removal of a lock-nut


Remove a lock-nut, using special adaptation (fig. 5.18).

Fig. 5.19. Removal of an adjusting cover


Remove an adjusting cover (fig. 5.19).

"previous page
5.3.3. Dismantling of the steering mechanism and steering drafts
following page"
5.3.3.2. Dismantling of a shaft of a gear wheel and case