Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
5.1. General information
5.2. General checks
5.3. Working operations with the steering mechanism
5.3.1. Precautionary measures during the work with system of passive safety (SRS)
5.3.2. Removal, check and installation of a steering wheel and steering column
5.3.3. Dismantling of the steering mechanism and steering drafts
5.3.3.1. Dismantling of steering draft
5.3.3.2. Dismantling of a shaft of a gear wheel and case
5.3.3.3. Dismantling of the top bearing and epiploon
5.3.3.4. Dismantling of an epiploon of an internal guide
5.3.4. Check of the steering mechanism and steering drafts
5.3.5. Removal and installation of the pump of the hydraulic booster
5.4. Tables
6. Brake system
7. Onboard electric equipment
8. Body
 








5-3-3-2-razborka-vala-shesterni-i-korpusa.html

5.3.3.2. Dismantling of a shaft of a gear wheel and case

Fig. 5.20. Removal of the case




Holding a gear wheel shaft, as shown in the figure 5.20, take out the case and a shaft of a gear wheel.

NOTE
If the shaft of a gear wheel is not taken out by a hand, use a press.


Fig. 5.21. Extraction of a shaft of a gear wheel


Push out a gear wheel shaft from the valve case, as shown in the figure 5.21.

Fig. 5.22. Removal of a lock ring of a shaft of a gear wheel


Accurately remove a lock ring, trying not to damage a gear wheel shaft.

"previous page
5.3.3.1. Dismantling of steering draft
following page"
5.3.3.3. Dismantling of the top bearing and epiploon




d925ae9b