Installation of differential in a coupling case. Mazda 3 (since 2003 release)
Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General information
3.2.2. Check and replacement of oil in the mechanical transmission
3.2.3. Removal and installation of the sensor of a speedometer of the car (without anti-blocking system of brakes)
3.2.4. Replacement of an epiploon (differential)
3.2.5. Removal and installation of the mechanism of gear shifting
3.2.6. Coupling case, dismantling of elements of a case of the main transfer
3.2.7. Check and assembly of components of differential and case of the main transfer
3.2.7.1. Installation of bearings of a gear gear wheel
3.2.7.2. Assembly of a cylindrical pin
3.2.7.3. Adjustment of a preliminary tightness in the bearing
3.2.7.4. Installation of differential in a coupling case
3.2.7.5. Installation of a case of the main transfer
3.2.7.6. Elimination of gaps of primary, secondary shaft and shaft of differential of a case of the main transfer
3.2.7.7. Measurement of loading of primary, secondary shaft and shaft of differential of a case of the main transfer
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








3-2-7-4-ustanovka-differenciala-v-karter-scepleniya.html

3.2.7.4. Installation of differential in a coupling case

Establish differential in a coupling case, establish a holder of the bearing and special adaptation (selector) on differential. Install special devices (selectors) for main and secondary shaft in a coupling case.

Fig. 3.56. Installation of primary and secondary shaft in a coupling case


Establish shaft with gear wheels, as shown in the figure 3.56.

Fig. 3.57. Installation of special adaptation


Install special adaptation (plugs) in the provisions shown in the figure 3.57.

"previous page
3.2.7.3. Adjustment of a preliminary tightness in the bearing
following page"
3.2.7.5. Installation of a case of the main transfer




d925ae9b