Adjustment of an inclination of a seatback. Mazda 3 (since 2003 release)
Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.1.1. Dimensions and general view of the car
1.1.2. Technical characteristics
1.1.3. Identification data of the car
1.1.4. Podkapotny space
1.1.5. Filling capacities of units and systems. The recommended operational materials
1.1.6. Keys, locks of doors, hatch, anticreeping system
1.1.7. Governing bodies and combination of devices
1.1.8. Information display
1.1.9. Electronic immobilizer (anticreeping system)
1.1.10. Heater, conditioner and system of ventilation of interior of the car
1.1.11. Lever of the drive of the parking brake system
1.1.12. Seats
1.1.12.1. Adjustment of longitudinal provision of seats
1.1.12.2. Adjustment of an inclination of a seatback
1.1.12.3. Adjustment of a driver's seat on height
1.1.12.4. Adjustment of a lumbar support (driver's seat)
1.1.12.5. Adjustment of head restraints
1.1.12.6. Electroheating of seats
1.1.12.7. Folding of a back of a back seat
1.1.12.8. Return of backs of a back seat to vertical position
1.1.12.9. A clamp of a back of a back seat (cars with a body "sedan")
1.1.12.10. Adjustment of head restraints of back seats on height
1.1.12.11. Installation of a head restraint into the central passenger seat on back sitting
1.1.12.12. Armrest
1.2. System of passive safety
1.3. Use of the car to destination
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








1-1-12-2-regulirovka-naklona-spinki-sidenya.html

1.1.12.2. Adjustment of an inclination of a seatback

Rotary handle.

Fig. 1.116. Adjustment by means of the rotary handle


To adjust a seatback inclination, bend a little forward (for unloading of a back from body weight) and bring a back into required position, rotating the rotary handle. Then deviate back to reach a comfortable position (fig. 1.116).

Clamp lever.

Fig. 1.117. Adjustment by means of the clamp lever


To adjust a seatback inclination, bend a little forward (for unloading of a back from body weight) and lift the clamp lever up. Holding the lever, deviate back and bring a back into required position. After that release the lever of a clamp (fig. 1.117).
Check that the lever of a clamp returned to a starting position and the seatback was reliably recorded on the place. For this purpose try to shake a back forward and back.

NOTE
Returning the inclined seatback in vertical position, hold it with other hand when you press the clamp lever. If not to hold a back, it can deviate sharply forward.

"previous page
1.1.12.1. Adjustment of longitudinal provision of seats
following page"
1.1.12.3. Adjustment of a driver's seat on height




d925ae9b