Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.1.1. Dimensions and general view of the car
1.1.2. Technical characteristics
1.1.3. Identification data of the car
1.1.4. Podkapotny space
1.1.5. Filling capacities of units and systems. The recommended operational materials
1.1.6. Keys, locks of doors, hatch, anticreeping system
1.1.7. Governing bodies and combination of devices
1.1.8. Information display
1.1.9. Electronic immobilizer (anticreeping system)
1.1.10. Heater, conditioner and system of ventilation of interior of the car
1.1.11. Lever of the drive of the parking brake system
1.1.12. Seats
1.1.12.1. Adjustment of longitudinal provision of seats
1.1.12.2. Adjustment of an inclination of a seatback
1.1.12.3. Adjustment of a driver's seat on height
1.1.12.4. Adjustment of a lumbar support (driver's seat)
1.1.12.5. Adjustment of head restraints
1.1.12.6. Electroheating of seats
1.1.12.7. Folding of a back of a back seat
1.1.12.8. Return of backs of a back seat to vertical position
1.1.12.9. A clamp of a back of a back seat (cars with a body "sedan")
1.1.12.10. Adjustment of head restraints of back seats on height
1.1.12.11. Installation of a head restraint into the central passenger seat on back sitting
1.1.12.12. Armrest
1.2. System of passive safety
1.3. Use of the car to destination
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 










d925ae9b

1-1-12-1-regulirovka-prodolnogo-polozheniya-sidenijj.html

1.1.12.1. Adjustment of longitudinal provision of seats

ATTENTION
Carry out adjustment of a driver's seat only on the motionless car. It is dangerous to regulate a driver's seat on the run of the car. The driver can lose control over the car that is fraught with the road accident.


Fig. 1.115. Longitudinal adjustment of a seat


To move a seat forward or back, raise a bracket of a clamp and shift a seat in required position. Then release a bracket to record a seat on the place (fig. 1.115).
Check that the bracket of a clamp returned to a starting position and a seat it was reliably recorded on the place. For this purpose try to shift a seat forward and back.

"previous page
1.1.12. Seats
following page"
1.1.12.2. Adjustment of an inclination of a seatback