Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.1.1. Dimensions and general view of the car
1.1.2. Technical characteristics
1.1.3. Identification data of the car
1.1.4. Podkapotny space
1.1.5. Filling capacities of units and systems. The recommended operational materials
1.1.6. Keys, locks of doors, hatch, anticreeping system
1.1.7. Governing bodies and combination of devices
1.1.8. Information display
1.1.9. Electronic immobilizer (anticreeping system)
1.1.10. Heater, conditioner and system of ventilation of interior of the car
1.1.11. Lever of the drive of the parking brake system
1.1.12. Seats
1.1.12.1. Adjustment of longitudinal provision of seats
1.1.12.2. Adjustment of an inclination of a seatback
1.1.12.3. Adjustment of a driver's seat on height
1.1.12.4. Adjustment of a lumbar support (driver's seat)
1.1.12.5. Adjustment of head restraints
1.1.12.6. Electroheating of seats
1.1.12.7. Folding of a back of a back seat
1.1.12.8. Return of backs of a back seat to vertical position
1.1.12.9. A clamp of a back of a back seat (cars with a body "sedan")
1.1.12.10. Adjustment of head restraints of back seats on height
1.1.12.11. Installation of a head restraint into the central passenger seat on back sitting
1.1.12.12. Armrest
1.2. System of passive safety
1.3. Use of the car to destination
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








d925ae9b




1-1-12-11-ustanovka-podgolovnika-na-centralnoe-passazhirskoe-mesto-na-zadnem-sideni.html

1.1.12.11. Installation of a head restraint into the central passenger seat on back sitting

If the central head restraint is not established into position, transportation of the passenger on the central place on back sitting is dangerous. At absence or the wrong adjustment of a head restraint the sharp deviation of the head back during blow of the car behind will lead to severe injuries of a neck. The head restraint has to be always in the working family way if the passenger is in the central place on back sitting. Be convinced of the correct installation of the central head restraint.

Fig. 1.126. Installation of the central head restraint


To establish a head restraint into position, pull it up to operation of a clamp. to lower a head restraint in non-working situation, press the button of a clamp and then press a head restraint (fig. 1.126) down.

"previous page
1.1.12.10. Adjustment of head restraints of back seats on height
following page"
1.1.12.12. Armrest