Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.4. Driving mechanism
3.4.1. General information
3.4.2. Forward power shafts
3.4.2.1. Check of a gap in the hug bearing of a forward wheel
3.4.2.2. Check of a gap in the hug bearing of a forward wheel
3.4.3. Removal and installation of a nave of a forward wheel
3.4.4. Removal and installation of a nave of a back wheel
3.4.5. Removal and installation of a nave of a back wheel
3.4.6. Removal and installation of a forward connecting shaft
3.4.7. Assembly and dismantling of a connecting shaft
3.4.8. Removal and installation of a power shaft (cars with the mechanical transmission)
3.4.9. Removal and installation of a power shaft (cars with the automatic transmission)
3.4.10. Removal and installation of a power shaft (cars with the mechanical transmission)
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








d925ae9b




3-4-2-2-proverka-zazora-v-podshipnike-stupicy-perednego-kolesa.html

3.4.2.2. Check of a gap in the hug bearing of a forward wheel

Remove a nave bolt, using special devices.

Fig. 3.101. A part of a casing which needs to be bent



NOTE
If the protection cover prevents removal of a bolt of a nave of a wheel, make by the part shown in the figure 3.101, several easy blows a chisel and unbend it back to a rotary fist.

Establish a bolt in a wheel nave, establish a washer and a nut on a nave bolt.

Fig. 3.102. Tightening of nuts of fastening of a nave of a wheel: 1 – nave bolt; 2 – wheel nuts; 3 – brass core; 4 – washer


Tighten fastening nuts, holding a wheel nave a brass core (fig. 3.102).

"previous page
3.4.2.1. Check of a gap in the hug bearing of a forward wheel
following page"
3.4.3. Removal and installation of a nave of a forward wheel