Check of the lever of the selector. Mazda 3 (since 2003 release)
Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.3. Automatic transmission
3.3.1. General information
3.3.2. Design and operation of the mechanism of transmission
3.3.3. System of electronic control (RSM)
3.3.4. Mechanism of switching of the automatic transmission
3.3.4.1. Principle of operation of the mechanism of switching of the automatic transmission
3.3.4.2. Switching blocking check
3.3.4.3. Check of blocking of the ignition key
3.3.4.4. Check of a cable of blocking
3.3.4.5. Check of the lever of the selector
3.3.4.6. Adjustment of a cable of the choice of transfer
3.3.4.7. Adjustment of the switch of range of the transmission
3.3.4.8. Removal and installation of the lever of the selector
3.3.4.9. Installation of a cable of blocking
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








3-3-4-5-proverka-rychaga-selektora.html

3.3.4.5. Check of the lever of the selector

Turn the ignition key in position of ON (the engine is switched off).
Make sure that when translating the lever, at the pressed brake pedal, in each situation the click is heard.
Make sure that the lever of the selector can be moved.
Make sure that when translating the lever, at the pressed brake pedal, in each situation from P to l the click is heard.
Make sure that in each position of the lever of the selector the corresponding indicator lights up.
If it not so, adjust the transmission range switch.

Fig. 3.79. Check of the lever of the selector


Check that the car works in each chosen range (fig. 3.79).

"previous page
3.3.4.4. Check of a cable of blocking
following page"
3.3.4.6. Adjustment of a cable of the choice of transfer




d925ae9b