Mazda 3 since 2003
	1. Operation and maintenance of the car
	2. Engine
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
		8.1. General information
		8.2. Hinged components of a body
			8.2.1. Removal and installation of a cowl
			8.2.2. Adjustment of provision of a cowl
			8.2.3. Removal and installation of the panel of a forward wing
			8.2.4. Removal and installation of a front bumper
			8.2.5. Removal and installation of a rear bumper
			8.2.6. Doors
			8.2.7. Removal and installation of a forward door
			8.2.8. Removal and installation of a back door
			8.2.9. Adjustment of a door
			8.2.10. Adjustment of a door of a back
			8.2.11. Removal and installation of glass of a forward door
			8.2.12. Removal and installation of glass of a back door
			8.2.13. Removal and installation of the block of a forward door
			8.2.14. Removal and installation of the block of a back door
			8.2.15. Window regulators
		8.3. Body glazing
		8.4. Seats
		8.5. Conditioner and heater
		8.6. Tables

8-2-8-snyatie-i-ustanovka-zadnejj-dveri.html

8.2.8. Removal and installation of a back door

ATTENTION

Maloperation with the sensor of a side safety cushion can lead to casual operation of a pillow which can seriously wound.

NOTE

The sensor of a side safety cushion settles down in the central rack.

Disconnect a negative wire of the rechargeable battery.

To remove the limiter of opening of a door, turn the loudspeaker of a back door.

Fig. 8.21. Removal of a back door: 1 – socket; 2 – back door loop; 3 – back door; 4 – limiter of opening of a door

Remove in the order shown in the figure 8.21.

Establish as it should be, the return to removal.

Adjust a forward door.