Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical transmission
3.2.1. General information
3.2.2. Check and replacement of oil in the mechanical transmission
3.2.3. Removal and installation of the sensor of a speedometer of the car (without anti-blocking system of brakes)
3.2.4. Replacement of an epiploon (differential)
3.2.5. Removal and installation of the mechanism of gear shifting
3.2.5.1. Instructions on installation of a cable of the choice of transfer
3.2.6. Coupling case, dismantling of elements of a case of the main transfer
3.2.7. Check and assembly of components of differential and case of the main transfer
3.3. Automatic transmission
3.4. Driving mechanism
3.5. Tables
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








3-2-5-1-ukazaniya-po-ustanovke-trosa-vybora-peredachi.html

3.2.5.1. Instructions on installation of a cable of the choice of transfer

Remove the central console.
Make sure that the gear shifting lever (from the transmission) is in neutral situation.

Fig. 3.34. Unblocking and blocking of a clamp of a cable of the choice of transfer


Unblock a transfer choice cable clamp (from the gear shifting lever) in the order shown in the figure 3.34.
Move the gear shifting lever to neutral situation.
Block a transfer choice cable clamp (from a switching drive cable) in the order shown in the figure 3.34.
Install the central console.
Move the gear shifting lever from neutral to other situation and make sure that other elements in this area do not disturb the lever.

"previous page
3.2.5. Removal and installation of the mechanism of gear shifting
following page"
3.2.6. Coupling case, dismantling of elements of a case of the main transfer