Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.9.1. Removal and installation of system of an admission
2.9.1.1. Removal
2.9.1.2. Installation
2.9.2. Removal and installation of the regulator of idling
2.9.3. Removal and installation of a pedal of management of fuel supply
2.9.4. Check and adjustment of a cable of the drive of a butterfly valve
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








2-9-1-1-snyatie.html

2.9.1.1. Removal

Uncover the rechargeable battery.
Disconnect a negative wire from the rechargeable battery.
Remove the lower cover.
Uncover the socket and the PCM block socket.
Uncover the air filter and take out the filtering element.
Remove the case of the air filter.
Uncover an air duct of system of an admission and an air duct.
Disconnect an air hose.
Remove the electromagnetic valve of a purge.
Merge cooling liquid from the engine.
Remove a throttle branch pipe.
Disconnect a tube of recirculation of the fulfilled gases (from an inlet collector).
Disconnect a hose of cooling liquid of the engine from a pipe of cooling liquid of the engine.

Fig. 2.310. Arm of fastening of a cable of an accelerator


Remove an accelerator cable arm from an inlet collector (fig. 2.310).
Remove an inlet collector.

"previous page
2.9.1. Removal and installation of system of an admission
following page"
2.9.1.2. Installation




d925ae9b