Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.3.1. Lubrication system
2.3.1.1. Check of pressure of oil
2.3.1.2. Replacement of engine oil
2.3.1.3. Replacement of an oil filter
2.3.1.4. Removal and installation of the oil cooler
2.3.1.5. Removal and installation of the oil pallet
2.3.1.6. Removal and installation of the oil pump
2.3.2. Cooling system
2.3.3. Fuel system
2.3.4. System of release
2.4. Appendix 2
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 










d925ae9b

2-3-1-3-zamena-maslyanogo-filtra.html

2.3.1.3. Replacement of an oil filter

Remove a drain stopper of an oil filter.

Fig. 2.202. Oil filter: 1 – sealing ring; 2 – cover of an oil filter


Turn off a cover of an oil filter on 2 turns and merge engine oil (fig. 2.202).
Remove an oil filter.
Use pure rags to wipe a landing surface on the adapter and a cover of an oil filter.
Apply pure oil on a new sealing ring of a new oil filter and a new drain stopper of an oil filter.

Fig. 2.203. Components of an oil filter: 1 – adapter; 2 – sealing ring of a cover; 3 – cover; 4 – sealing ring of a drain stopper; 5 – drain stopper


Establish an oil filter, a drain stopper of an oil filter and a cover of an oil filter (fig. 2.203).
Tighten a cover of an oil filter and a drain stopper of an oil filter.
Inhaling moment:
cover of an oil filter – 30–35 N · m;
drain stopper of an oil filter – 9. 0–11 N · m.
Start the engine and check lack of leak of oil.
Check oil level. In case of need add oil.

"previous page
2.3.1.2. Replacement of engine oil
following page"
2.3.1.4. Removal and installation of the oil cooler