Installation of a towing loop in front of the car. Mazda 3 (since 2003 release)
Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.2. System of passive safety
1.3. Use of the car to destination
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.4.1. Spare wheel and set of tools
1.4.2. Engine overheat
1.4.3. Evacuation of the car
1.4.3.1. Installation of a towing loop in front of the car
1.4.4. General information and security measures at control survey and maintenance of the car
1.4.5. Lamps of devices of lighting and light alarm system
1.4.6. Care of a body and interior of the car
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 








1-4-3-1-ustanovka-buksirnojj-petli-speredi-avtomobilya.html

1.4.3.1. Installation of a towing loop in front of the car

1. Get a towing loop and a wheel key from the luggage compartment.

Fig. 1.170. Extraction of a cap from a front bumper


2. In order to avoid damage of a paint and varnish covering of a bumper wind the handle of a wheel key with soft rags and open the cap located on a front bumper (fig. 1.170).

ATTENTION
Keep in mind that the cap is not removed from a bumper completely. Do not make excessively great efforts for a cap: it can lead to damage of a cap or scratches on a paint and varnish covering of a bumper.

3. Reliably fix a towing loop by a wheel key.

Fig. 1.171. Extraction of a towing loop


4. Hook on a hook of a towing cable for a towing loop (fig. 1.171).

ATTENTION
If the towing loop is not reliably tightened, in the course of evacuation of the car it can leave a fixing nest in a bumper.

"previous page
1.4.3. Evacuation of the car
following page"
1.4.4. General information and security measures at control survey and maintenance of the car




d925ae9b