Mazda 3 since 2003
1. Operation and maintenance of the car
1.1. Description of the car
1.2. System of passive safety
1.3. Use of the car to destination
1.4. Elimination of the malfunctions which arose in way or before a start of motion
1.4.1. Spare wheel and set of tools Mobile jack Spare wheel Replacement of a faulty wheel Dismantle of a faulty wheel Installation of a spare wheel
1.4.2. Engine overheat
1.4.3. Evacuation of the car
1.4.4. General information and security measures at control survey and maintenance of the car
1.4.5. Lamps of devices of lighting and light alarm system
1.4.6. Care of a body and interior of the car
1.5. Tables
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body


1-4-1-5-ustanovka-zapasnogo-kolesa.html Installation of a spare wheel

1. Clear rags of dirt privalochny surfaces on a disk of a wheel and a nave, and also hairpins.
2. Establish a spare wheel.
3. Screw wheel nuts on hairpins (the conic party of nuts has to be turned to a wheel). Tighten nuts by hand.

Fig. 1.167. An order of delay in fastening of nuts at installation of a spare wheel

4. Rotating the cranked handle of a jack counterclockwise, lower the car. By means of a wheel key tighten nuts in specified in the drawing 1.167 sequences.
The moment of an inhaling of wheel nuts – 88–117 (9–11) Nanometers (kgf-m)
5. Lay a faulty wheel in a niche of the luggage compartment and fix a wheel by means of a clamping washer and a bolt.
6. Check air pressure in the tire.
7. As soon as possible repair the damaged wheel or replace it with new.

"previous page Dismantle of a faulty wheel
following page"
1.4.2. Engine overheat