Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. Wheels and tires
4.1.1. Adjustment of angles of installation of wheels
4.1.2. Adjustment of an angle of rotation of forward wheels
4.1.3. Adjustment of installation of back wheels
4.1.4. Balancing of wheels (16-inch and 17-inch cast light-alloy wheels)
4.1.4.1. The glued balance weight (external)
4.1.4.2. Installation of freight of usual type (internal)
4.1.4.3. Check of size of a residual imbalance
4.2. Suspension bracket
4.3. Tables
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 










d925ae9b

4-1-4-2-ustanovka-gruza-obychnogo-tipa-vnutrennego.html

4.1.4.2. Installation of freight of usual type (internal)

Measure imbalance size on the machine for balancing of wheels.

Fig. 4.9. Scheme of installation of a usual balance weight


Establish the freight corresponding to the measured imbalance size in the situation (on an internal part of a rim) specified by the machine for balancing of wheels (fig. 4.9).

ATTENTION
– Do not establish more than three freights.
– The mass of one freight should not exceed 60 g.
– Lump of two freights should not exceed 100 g.


"previous page
4.1.4.1. The glued balance weight (external)
following page"
4.1.4.3. Check of size of a residual imbalance