Mazda 3 since 2003
1. Operation and maintenance of the car
2. Engine
2.1. General description of new engines of the L8, LF and L3 models
2.2. Mechanical part of engines
2.3. Appendix 1
2.4. Appendix 2
2.4.1. Check of installation of a corner of an advancing of ignition
2.4.1.1. Check of frequency of rotation of idling
2.4.1.2. Check of composition of mix idling
2.5. Appendix 3
2.6. The Z6 engine – a mechanical part
2.7. Lubrication system
2.8. Cooling system
2.9. System of an admission
2.10. Fuel system
2.11. System of production of the fulfilled gases and system of decrease in toxicity
2.12. System of ignition
2.13. Control system
2.14. Tables
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
 










d925ae9b

2-4-1-2-proverka-sostava-smesi-na-kholostom-khodu.html

2.4.1.2. Check of composition of mix idling

1. Switch off consumers of the electric power and warm up the engine.

Idling (L8 engine)

Idling (the LF engine, model with the mechanical transmission)

Idling (the LF engine, model with the automatic transmission)

Idling (L3 engine)

* Excludes temporary decrease in frequency of rotation of idling right after inclusion of consumers of the electric power.
** The electric motor of the fan works at high speed. The switch of headlights is switched on. The switch of a heater of back glass is switched on. Fans of the cooling system work.

Start the engine.
Support the frequency of rotation of the engine approximately 3000 min.-1, cooling system fans will not begin to work yet.
Release a pedal of management of fuel supply.
Wait for switching off of fans of the cooling system.
Check compliance to norm of frequency of rotation of idling and installation of a corner of an advancing of ignition.
Insert the probe of the analyzer of exhaust gases into an exhaust pipe.
Check compliance to standard of concentration of CO and HC in the fulfilled gases.

"previous page
2.4.1.1. Check of frequency of rotation of idling
following page"
2.5. Appendix 3